Differences between capacitive and infrared touch screens

Capacitive touch screens operate by detecting changes in capacitance when a conductive object, such as a finger, comes into contact with the screen. This technology offers high sensitivity, allowing for precise touch input with minimal pressure. Capacitive touch screens are commonly found in smartphones, tablets, and other consumer electronics due to their responsiveness and support for multi-touch gestures. However, they may be susceptible to interference from moisture and contaminants, making them less suitable for outdoor use or harsh environments. 

Check now

Projected Capacitive technology (more commonly referred to as PCAP) is the new kid on the block when it comes to touch technology. It is the same technology though that is used in smartphones and tablets due to its high levels of accuracy and speedy response times. The way PCAP touch technology works is by fixing a sensor grid between a layer of cover glass and the LCD panel, so when a finger touches the glass the grid detects the coordinates of the touch point. This is shown in the diagram below.

With this type of technology no recessed bezel is required and has a strong tempered edge-to-edge glass front for a more striking display. From easy cleaning to smooth gesture recognition PCAP is the definitive touch technology. This however comes at a cost as PCAP touch screens can be up to 60% more expensive than their Infrared counterparts.

Infrared touch technology (also known as IR) is the most widely used touch screen in commercial applications and has been the industry standard for decades. Using IR technology means that no actual contact with the screen is required so less damge is incurred over time. It works by embedding LED lights and sensors into the bezel of a monitor above the glass. These LED&#;s beam a signal across to the corresponding sensor on the other side forming an invisible grid. When the grid is broken by a finger, or other solid object, the sensors can detect the touch point. This is shown in the diagram below.

With competitive price and timely delivery, IRTOUCH sincerely hope to be your supplier and partner.

A bezel will always be required when IR is used due to the way it works. There is no chance of edge-to-edge glass being used with IR. However unlike PCAP, IR technology can scale to very large sizes with no drop in quality. From our Infrared Wall Mounted range, the Infrared Freestanding and Infrared Kiosks to our Interactive touch Displays which also use IR touch technology.

PCAP and Infrared are the two most suitable forms of technology used in commercial touch screens.

Both are great but depending on the customer&#;s requirements one may be more suitable than the other.PCAP is the touch technology of the future but it does come at a larger upfront cost. Infrared is the tried and trusted staple of touch technology. If you are looking for a more budget friendly touch screen then I suggest choosing an Infrared touch screen. If you are willing to invest then a PCAP touch screen will be worth every penny. There is no right or wrong answer when it comes to picking between the two; it is simply a matter of suitability.

The company is the world’s best infrared touch screen for express cabinet supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.