Hidden danger 1: There is no guardrail on the edge of the steel platform, and the residual materials on the platform are not cleaned up
Hidden dangers:
The guardrail of the aerial work platforms is not set up in time according to regulations. When working at height, workers are prone to instability and fall if they are subjected to external force or inertia when there are no other protective facilities or working.
Materials, waste materials, tools, etc. involved in aerial work operations are likely to fall from heights and cause casualties;
Hidden danger 2: There are no railings or skirting boards on the side of the high-rise scaffolding platform facing the air, and the dense mesh safety net is not used for closure. There is no safety net on the outside, the scaffolding board is not fully laid, and the end is not fixed.
Hidden dangers:
There are no railings or skirting boards on the side of the scaffolding platform facing the air, and the dense mesh safety net is not used for closure, which is easy to cause people to fall.
The scaffolding board is not fully laid, the end is not fixed, and there is no safety net on the outside, which is easy to cause people and materials to fall.
Rectification of the above hidden dangers:
1. Check whether there are any missing, intact and effective facilities, aging, damage, failure, etc. in the high-altitude work platform and the scaffolding erected on the periphery of the vertical cable-making plant steel structure, all railings, dense mesh safety kings, safety flat nets, etc.
2. Check whether employees comply with safety operating procedures, whether they participate in the third-level education, and whether there are any unsafe behaviors such as illegal operations and fatigue operations.
3. Set up a professional safety production hidden danger investigation team, led by the project manager in person and participated by the heads of relevant departments.
4. Develop a detailed investigation plan to clarify the time, location, content, and responsible person of the investigation.
5. Use various methods such as on-site inspection, inquiry, and reference to materials to carry out the hidden danger investigation work in a comprehensive and in-depth manner.
6. For the above-mentioned safety production hidden dangers, classify and sort them immediately, and clarify the rectification measures and rectification time limit.
7. The project formulates a safety hidden danger supervision and management mechanism. Establish and improve the hidden danger investigation and rectification archives, record the rectification process throughout, and ensure the traceability of the rectification work.
Comments
All Comments ( 0 )