Bearing Assembly Of Slurry Pumps
Slurry pump bearing components, also known as rotor components, are part of the slurry pump components. It is an important part of the slurry pump as the transmission power unit.
Bearing Assembly Of Slurry Pumps
Slurry pump bearing components, also known as rotor components, are part of the slurry pump components. It is an important part of the slurry pump as the transmission power unit.
The bearing assembly is used to connect the pump and the motor components to form a complete working system.
The stability of the slurry pump bearing assembly directly affects the operation and service life of the pump.
It is used to transmit power, withstand the working state of the force, and the corresponding axial force.
Make sure the impeller rotates and drives on the same axis.
1. Maze sets, 2. Oil cups, 3. Butter ring, 4. Bearing body, 5. Bearings, 6. Adjust the pad, 7. End cover, 8. Shaft, 9. 10 inch nuts, 10. End cap fastening screws
The following are the roles of 10 parts:
The main role of the bearing body is to support the shaft and bearing, to ensure the axis of rotation, to withstand the force, the working body, and power connected.
Bearings bear the meridional and axial force to achieve effective rotation. The installation gap for different bearing components of the slurry pump is not the same.
The shaft is the centerline of the pump's rotation. Both ends are used to connect the impeller and coupling, connect the active parts, and transfer power to the working components.
The bearing cover is used to secure and position the exact position of the shaft, adjust the bearing clearance, and bear the axial force of the pump.
Maze sets, oil cups, and labyrinth rings are used to seal both ends of the bearing. They prevent the leakage of bearing grease and stop external debris and sewage from entering the bearing. The oil cup injects the grease into the maze ring, serving as a seal and lubrication.
The main role of the butter retaining ring is to ensure normal lubrication of the bearing, block certain grease, and ensure excess waste oil is excluded through the butter ring and the gap between the bearing.
The adjust pad is used to adjust the bearing clearance of the components. They come in four specifications: 0.5mm, 0.3mm, 0.2mm, and 0.14mm, according to different component standards.
Inch nuts are mainly driven to secure the maze sets and bearings.
Slurry pump bearing components use lithium grease for lubrication.
Bearing assembly installation is very important. Improper installation can easily cause malfunctions such as the slurry pump not running, running unstably, broken shafts, vibrations, etc.
Problems and precautions when the bearing components work:
In the course of use, bearing components are prone to the following two problems: bearing temperature is too high, and bearing components wear out quickly.
Reasons for high temperature:
1. Improper adjustment of bearing trainee, not meeting assembly standards
2. Excess, too little, or impure grease
3. Improper selection of slurry pump, power too large
Reason for damage too fast:
1. Poor quality of the bearing itself
2. Assembly does not meet standards, dirt in the grease
To ensure bearing components meet work requirements and operate normally, attention must be paid to the following:
A. Increase the degree of attention to the slurry pump. It plays an irreplaceable role in production. Follow work performance, technical standards, and use standard operations strictly.
B. Ensure external cleanliness; improper adjustment of shaft seal reduces heat performance. Improper belt adjustment leads to bearing heating and premature damage.
C. Regular refueling on time, clearing bearing body oil. Poor lubrication and debris lead to reduced life.
D. Reduce the vibration of the slurry pump work, ensure no parts are loose to avoid reducing service life.
The operating procedure should be adhered to strictly; the assembly should follow technical standards to ensure initial quality.
Slurry pump bearing components are the heart of the whole pump. Though their value is relatively small compared to the pump, improper installation can adversely affect the pump.
A. Improve operator responsibility and provide appropriate technical training.
B. Establish a corresponding operating process.
C. Ensure smooth cooperation between operators and repair workers for the use and maintenance of slurry pumps.
D. For new pumps or new bearing components, monitor the bearing temperature to ensure a normal temperature operation. High-temperature operation should be avoided to prevent bearing damage.
Slurry Pump Bearing Assembly with TIMKEN
Slurry Pump Bearing Assembly EEAM005M is installed on 6x4 AH and 8x6 AH Slurry Pumps.
Tobee® Slurry Pump Bearing Assembly are interchangeable with AH/HH/L/M slurry pump parts and designed by spatial structure CFD and impeller casting CAE. Precision casting and professional heat treatment processes make the parts harder. Advanced machining and painting technology ensure the parts conform with fluidics. With strict quality control, Tobee's high chrome wear parts provide longer life, 30%-60% higher efficiency due to advanced manufacturing processes, and reduced installation workload for users.
Slurry pump bearing assembly connects the slurry pump and motor parts to form a complete working system. Its stability directly affects the operation and service life of the pump. Before assembling, pre-heat the inner race of the bearing to a temperature below 120°C. The inner race must be fixed next to the shaft shoulder or grease retainer. For double row taper roller bearings, the inner ring, outer ring, and lantern ring come as a set; do not interchange the components.
Replacement Slurry Pump Bearing Assembly Code List:
Bearing Assembly
AH Slurry Pump
Slurry Pump Bearing Brand
B005M
1.5/1B-AH, 2/1.5B-AH
ZWZ, SKF, TIMKEN Brand
C005M
3/2C-AH, 4/3C-AH
ZWZ, SKF, TIMKEN Brand
CAM005M
4/3C-AH
ZWZ, SKF, TIMKEN Brand
D005M
4/3D-AH, 6/4D-AH
ZWZ, SKF, TIMKEN Brand
DAM005M
6/4D-AH
ZWZ, SKF, TIMKEN Brand
E005M
6/4E-AH, 8/6E-AH
ZWZ, SKF, TIMKEN Brand
EAM005M
8/6E-AH
ZWZ, SKF, TIMKEN Brand
R005M
8/6R-AH
ZWZ, SKF, TIMKEN Brand
FAM005M
8/6F-AH, 10/8F-AH, 12/10F-AH
ZWZ, SKF, TIMKEN Brand
SH005M
10/8ST-AH, 12/10ST-AH, 14/12ST-AH
Contact us to discuss your requirements of Lined Slurry Pump. Our experienced sales team can help you identify the options that best suit your needs.
ZWZ, SKF, TIMKEN Brand
G005M
14/12G-AH
ZWZ, SKF, TIMKEN Brand
TH005M
16/14TU-AH, 18/16TU-AH, 20/18TU
ZWZ, SKF, TIMKEN Brand
Bearing Assembly
HH Slurry Pump
Slurry Pump Bearing Brand
CAM005M
1.5/1C-HH
ZWZ, SKF, TIMKEN Brand
DAM005M
3/2D-HH
ZWZ, SKF, TIMKEN Brand
EAM005M
4/3E-HH
ZWZ, SKF, TIMKEN Brand
FAM005M
6/4F-HH
ZWZ, SKF, TIMKEN Brand
Bearing Assembly
M Slurry Pump
Slurry Pump Bearing Brand
EAM005M
10/8E-M
ZWZ, SKF, TIMKEN Brand
R005M
10/8R-M
ZWZ, SKF, TIMKEN Brand
Bearing Assembly
L Slurry Pump
Slurry Pump Bearing Brand
ASC005M
20A-L
ZWZ, SKF, TIMKEN Brand
BSC005M
50B-L
ZWZ, SKF, TIMKEN Brand
CAM005M
75C-L
ZWZ, SKF, TIMKEN Brand
DSC005M
100D-L
ZWZ, SKF, TIMKEN Brand
ESC005M
150E-L
ZWZ, SKF, TIMKEN Brand
S005M
300S-L
ZWZ, SKF, TIMKEN Brand
Bearing Assembly
G(H) Gravel Pump
Slurry Pump Bearing Brand
DAM005M
6/4D-G
ZWZ, SKF, TIMKEN Brand
EAM005M
8/6E-G
ZWZ, SKF, TIMKEN Brand
F005M
10/8F-G
ZWZ, SKF, TIMKEN Brand
S005-3M
10/8S-G, 10/8S-GH
ZWZ, SKF, TIMKEN Brand
G005M
12/10G-G, 14/12G-G, 12/10G-GH
ZWZ, SKF, TIMKEN Brand
TH005M
16/14TU-GH
ZWZ, SKF, TIMKEN Brand
Are you interested in learning more about Heavy Duty Slurry Pump? Contact us today to secure an expert consultation!
Comments
All Comments ( 0 )