Pieresearch 1415-6/18UBC 14/15in Quick-Lock Unibar ...

Pieresearch 1415-6/18UBC 14/15in Quick-Lock Unibar Centralizer, Adjustable, Rebar Size #6 - #18 (14/Box)

Our revolutionary new Quick-Lock® Unibar® (Patent No. 10,151,113) and Adjustable Quick-Lock® Unibar® centralizers (Patent No. 10,584,459 B2) are the answer to soil nailing — tendon/rebar alignment support. They keep the tendon/bar centered in the bore/drill hole to allow for minimum grout/concrete coverage and do not impede flow of grout within bore/drill hole and around tendon. Assemble quickly by simply snapping the two identical halves together over the tendon/rebar and tying it on with tie wire.

For more rebar centralizer priceinformation, please contact us. We will provide professional answers.

To achieve proper design strength in any drilled and grouted/concreted hole, the tendon/rebar or anchor material must be centered in the shaft to allow minimum coverage throughout the length of the element. Our Quick-Lock® Unibar® and Adjustable Quick-Lock® Unibar® centralizers are made of durable, noncorrosive plastic and are designed for a variety of applications where concrete cover must be maintained. Building a strong foundation is only a few clicks away! Our quality products and ease of installation allows you to save time and money on the job site. Imagine the infinite opportunities to use our Quick-Lock® Unibar® and Adjustable Quick-Lock® Unibar®Centralizers.

Quick-Lock® Unibar® and Adjustable Quick-Lock® Unibar® Centralizers will accommodate Single Bar, Multi-Bar/Strand Anchors, Encapsulated (DCP) Anchors, and Steel or Plastic Pipe Applications. They are ideal for Soil Nails, Rock/Soil Anchors, Micro-Piles, and Auger-Cast Piles with single tension bars.

Advantages:

• 2 identical halves
• easy to snap together
• made of durable non-corrosive plastic
• can be attached with zip ties or tie wire
• offset to fit between rebar threads
• keeps single tendon/bar centered within a drill hole
• ideal for soil nail applications
• no nuts or bolts required
• lightweight and economical

The lowest Quick-Lock® Unibar® or Adjustable Quick-Lock® Unibar® Centralizer should be installed approximately 1 foot from the end of the tendon/bar material. Each successive Unibar® Centralizer should be placed at no greater than 10-foot intervals. The upper Unibar® Centralizer should be approximately 1 feet below grout/concrete surface.

Perfect for your construction project and be sure to browse all of our concrete accessories as well as our concrete test equipment to ensure your project is built to last.

Sold 14 per box

16 boxes per pallet

 

The Pieresearch 1415-6/18UBC 14/15in Quick-Lock Unibar Centralizer is a revolutionary product that provides reliable and efficient support for soil nailing and tendon/rebar alignment. It is adjustable and designed to accommodate rebar sizes ranging from #6 to #18, making it versatile and suitable for various applications.

The Quick-Lock technology used in this centralizer allows for quick and easy assembly. Simply snap the two identical halves together over the tendon/rebar and secure it with tie wire. No nuts or bolts are required, saving you time and effort during installation.

Made from durable and non-corrosive plastic, the Quick-Lock Unibar Centralizer ensures long-lasting performance. Its lightweight and economical design make it a cost-effective choice for your construction projects.

This centralizer is specially designed to maintain minimum grout/concrete coverage throughout the length of the element. It keeps the tendon/bar centered in the bore/drill hole, allowing for optimal grout flow without impeding it. This ensures proper design strength of the drilled and grouted/concreted hole.

The Quick-Lock Unibar Centralizer is ideal for a wide range of applications, including soil nails, rock/soil anchors, micro-piles, and auger-cast piles with single tension bars. It can be used with single bar, multi-bar/strand anchors, encapsulated (DCP) anchors, and steel or plastic pipe applications.

To achieve the best results, it is recommended to install the centralizers at regular intervals. The lowest centralizer should be placed approximately 1 foot from the end of the tendon/bar material, and each successive centralizer should be spaced no greater than 10-foot intervals. The upper centralizer should be positioned approximately 1 foot below the grout/concrete surface.

The Pieresearch 1415-6/18UBC Quick-Lock Unibar Centralizer is sold in a box containing 14 pieces. For larger projects, 16 boxes are packed per pallet.

For additional technical information and resources, such as technical drawings, product spec sheets, and MSDS information, please refer to the provided links.

When it comes to building a strong foundation, trust Pieresearch and their innovative Quick-Lock Unibar Centralizers to deliver the performance and reliability you need. Browse our concrete accessories and concrete test equipment to ensure your project is built to last.

The Pieresearch 1415-6/18UBC 14/15in Quick-Lock Unibar Centralizer is a revolutionary product that provides reliable and efficient support for soil nailing and tendon/rebar alignment. It is adjustable and designed to accommodate rebar sizes ranging from #6 to #18, making it versatile and suitable for various applications.The Quick-Lock technology used in this centralizer allows for quick and easy assembly. Simply snap the two identical halves together over the tendon/rebar and secure it with tie wire. No nuts or bolts are required, saving you time and effort during installation.Made from durable and non-corrosive plastic, the Quick-Lock Unibar Centralizer ensures long-lasting performance. Its lightweight and economical design make it a cost-effective choice for your construction projects.This centralizer is specially designed to maintain minimum grout/concrete coverage throughout the length of the element. It keeps the tendon/bar centered in the bore/drill hole, allowing for optimal grout flow without impeding it. This ensures proper design strength of the drilled and grouted/concreted hole.The Quick-Lock Unibar Centralizer is ideal for a wide range of applications, including soil nails, rock/soil anchors, micro-piles, and auger-cast piles with single tension bars. It can be used with single bar, multi-bar/strand anchors, encapsulated (DCP) anchors, and steel or plastic pipe applications.To achieve the best results, it is recommended to install the centralizers at regular intervals. The lowest centralizer should be placed approximately 1 foot from the end of the tendon/bar material, and each successive centralizer should be spaced no greater than 10-foot intervals. The upper centralizer should be positioned approximately 1 foot below the grout/concrete surface.The Pieresearch 1415-6/18UBC Quick-Lock Unibar Centralizer is sold in a box containing 14 pieces. For larger projects, 16 boxes are packed per pallet.For additional technical information and resources, such as technical drawings, product spec sheets, and MSDS information, please refer to the provided links.When it comes to building a strong foundation, trust Pieresearch and their innovative Quick-Lock Unibar Centralizers to deliver the performance and reliability you need. Browse our concrete accessories and concrete test equipment to ensure your project is built to last.

If you want to learn more, please visit our website threaded rebars.

Additional resources:
Guidelines for Ordering U-Bolts

Pieresearch 6-8UBC 6in Quick-Lock Unibar Centralizer, Rebar Size #7 - #8 (60/Box)

Gutters and Gutter Protection: A Simple Buying Guide
10 Things to Consider When Buying Indented PC Wire
Top Tips for Choosing a Custom Custom Hay Baling Wire Exporter
How to Choose a Translucent Board Lampshade?
Mastering Hay Baling Wire: Tips for Optimal Use
10 Questions You Should Know about the Latest Innovations in Green Energy Solutions

Our revolutionary new Quick-Lock® Unibar® (Patent No. 10,151,113) and Adjustable Quick-Lock® Unibar® centralizers (Patent No. 10,584,459 B2) are the answer to soil nailing — tendon/rebar alignment support. They keep the tendon/bar centered in the bore/drill hole to allow for minimum grout/concrete coverage and do not impede flow of grout within bore/drill hole and around tendon. Assemble quickly by simply snapping the two identical halves together over the tendon/rebar and tying it on with tie wire.

To achieve proper design strength in any drilled and grouted/concreted hole, the tendon/rebar or anchor material must be centered in the shaft to allow minimum coverage throughout the length of the element. Our Quick-Lock® Unibar® and Adjustable Quick-Lock® Unibar® centralizers are made of durable, noncorrosive plastic and are designed for a variety of applications where concrete cover must be maintained. Building a strong foundation is only a few clicks away! Our quality products and ease of installation allows you to save time and money on the job site. Imagine the infinite opportunities to use our Quick-Lock® Unibar® and Adjustable Quick-Lock® Unibar®Centralizers.

Quick-Lock® Unibar® and Adjustable Quick-Lock® Unibar® Centralizers will accommodate Single Bar, Multi-Bar/Strand Anchors, Encapsulated (DCP) Anchors, and Steel or Plastic Pipe Applications. They are ideal for Soil Nails, Rock/Soil Anchors, Micro-Piles, and Auger-Cast Piles with single tension bars.

Advantages:

• 2 identical halves
• easy to snap together
• made of durable non-corrosive plastic
• can be attached with zip ties or tie wire
• offset to fit between rebar threads
• keeps single tendon/bar centered within a drill hole
• ideal for soil nail applications
• no nuts or bolts required
• lightweight and economical

The lowest Quick-Lock® Unibar® or Adjustable Quick-Lock® Unibar® Centralizer should be installed approximately 1 foot from the end of the tendon/bar material. Each successive Unibar® Centralizer should be placed at no greater than 10-foot intervals. The upper Unibar® Centralizer should be approximately 1 feet below grout/concrete surface.

Perfect for your construction project and be sure to browse all of our concrete accessories as well as our concrete test equipment to ensure your project is built to last.

Sold 60 per box

30 boxes per pallet

 

The Pieresearch 6-8UBC 6in Quick-Lock Unibar Centralizer is a revolutionary product designed to provide tendon and rebar alignment support in soil nailing applications. With its unique Quick-Lock® Unibar® design, this centralizer keeps the tendon or bar centered within the bore or drill hole, allowing for minimum grout or concrete coverage.

Constructed from durable and noncorrosive plastic, these centralizers are built to withstand demanding construction environments. They are easy to assemble, simply snap the two identical halves together over the tendon or rebar and secure it with tie wire. No nuts or bolts are required, making installation quick and hassle-free.

One of the key advantages of the Quick-Lock Unibar Centralizer is its versatility. It can accommodate various applications including single bar, multi-bar/strand anchors, encapsulated (DCP) anchors, and steel or plastic pipe applications. This makes it ideal for soil nails, rock/soil anchors, micro-piles, and auger-cast piles with single tension bars.

The centralizers are lightweight and economical, offering a cost-effective solution for tendon and rebar alignment. They can be attached with zip ties or tie wire, providing flexibility in installation. The offset design allows them to fit between rebar threads, ensuring proper positioning.

To achieve optimal results, it is recommended to install the centralizers at 10-foot intervals, with the lowest centralizer placed approximately 1 foot from the end of the tendon or bar material. The upper centralizer should be positioned approximately 1 foot below the grout or concrete surface.

Each box contains 60 Quick-Lock Unibar Centralizers, and there are 30 boxes per pallet, making it convenient for large-scale projects. Technical drawings, product spec sheets, and MSDS information are available for detailed reference.

Whether you are working on a soil nailing project or any other construction project, the Pieresearch 6-8UBC 6in Quick-Lock Unibar Centralizer is the solution you need. With its high-quality construction and ease of installation, it ensures your concrete elements are built to last. Browse our range of concrete accessories and test equipment to complete your project successfully.

The Pieresearch 6-8UBC 6in Quick-Lock Unibar Centralizer is a revolutionary product designed to provide tendon and rebar alignment support in soil nailing applications. With its unique Quick-Lock® Unibar® design, this centralizer keeps the tendon or bar centered within the bore or drill hole, allowing for minimum grout or concrete coverage.Constructed from durable and noncorrosive plastic, these centralizers are built to withstand demanding construction environments. They are easy to assemble, simply snap the two identical halves together over the tendon or rebar and secure it with tie wire. No nuts or bolts are required, making installation quick and hassle-free.One of the key advantages of the Quick-Lock Unibar Centralizer is its versatility. It can accommodate various applications including single bar, multi-bar/strand anchors, encapsulated (DCP) anchors, and steel or plastic pipe applications. This makes it ideal for soil nails, rock/soil anchors, micro-piles, and auger-cast piles with single tension bars.The centralizers are lightweight and economical, offering a cost-effective solution for tendon and rebar alignment. They can be attached with zip ties or tie wire, providing flexibility in installation. The offset design allows them to fit between rebar threads, ensuring proper positioning.To achieve optimal results, it is recommended to install the centralizers at 10-foot intervals, with the lowest centralizer placed approximately 1 foot from the end of the tendon or bar material. The upper centralizer should be positioned approximately 1 foot below the grout or concrete surface.Each box contains 60 Quick-Lock Unibar Centralizers, and there are 30 boxes per pallet, making it convenient for large-scale projects. Technical drawings, product spec sheets, and MSDS information are available for detailed reference.Whether you are working on a soil nailing project or any other construction project, the Pieresearch 6-8UBC 6in Quick-Lock Unibar Centralizer is the solution you need. With its high-quality construction and ease of installation, it ensures your concrete elements are built to last. Browse our range of concrete accessories and test equipment to complete your project successfully.

Contact us to discuss your requirements of threaded reinforcing bar price. Our experienced sales team can help you identify the options that best suit your needs.