In the field of home decoration, tile adhesive is a material commonly used in interior construction and is widely used for sticking all kinds of tiles. There are many reasons why tile adhesives stick firmly, and hydroxypropyl methyl cellulose powder (HPMC) is one of the factors that can improve the adhesive performance. Today, Kemox’s technicians will start from the raw material and teach you to mix the tile adhesive by hand.
Click here to get more.
Preparation before mixing
First of all, we have to prepare the raw materials for tile adhesive. If you’re scratching your head about the proportions of HPMC and other chemicals to add, don’t worry. You are welcome to seek advice from Kemox’s staff, which can eliminate any confusion you may have in tile adhesives. In a clean mixing bucket, we gradually add the raw materials of the tile adhesive, including HPMC. HPMC is not an ordinary additive, but a secret to improve the performance of the adhesive. We slowly mix the HPMC with the other required chemicals, adhering to the specified proportions. It’s like baking a cake – each ingredient needs to be perfectly balanced for a delicious result.
The Art of Mixing
Next, we gradually add water according to the recommended proportions. It’s like adding water gradually to flour. We use a mechanical mixer to blend the mixture until it becomes smooth, making sure that no lumps appear. This step is crucial because it ensures that the various additives are evenly distributed throughout the binder.
Testing the Tile Adhesive
We used a trowel to scrape out a small piece of tile adhesive for a closer look. The adhesive was then tested by pressing it onto a tile with the trowel and found that the tile was easily pried up. A thin, even layer of adhesive was applied from the tile substrate, slowly with the trowel. It’s like painting on a canvas, but instead of paint, we use adhesive. We press a brick firmly onto the tile on which we have just applied the adhesive.
Wait a few moments and let the adhesive slowly take effect. We want the adhesive to be set in the recommended time frame. After the setting period, it’s time for the moment of truth. We try to check the bond strength by prying the tiles up from the substrate. Since the bond of HPMC is so strong, it feels like the brick and tile have fused together.
Test Results
Our test results show that HPMC is more than just an additive, it’s a tile adhesive’s best friend. It improves the performance of adhesives and makes tiles stick stronger, longer, and more reliably. Therefore, the next time you lay tiles, it is recommended that you add a fixed percentage of HPMC in advance to ensure that your tiles stay where you want them to be no matter what.
Related reading: hydroxypropyl methyl cellulose price
Product Description
HPMC for Tile Adhesive
HPMC for tile adhesive contains other additives such as cement, sand and limestone, which can increase the adhesion of tile ceramics. Tile adhesive is a new modern decorative material used to paste tiles, face tiles, floor tiles and other decorative materials. There are many kinds of additives in tile adhesive, but usually cellulose ether additives are added to tile adhesive to improve water retention, thickening effect and open time.
Before using HPMC tile adhesive with adhesive will be powder and water 1 : 0.25-0.3 ratio. Stir it to be ready for construction after the adhesive is completely dry, you can adjust the tile position within the allowed operation time (about 24 hours to fill, 24 hours should prevent heavy objects from pressing on the tile surface).
Construction grade hydroxypropyl methyl cellulose is widely used in building grade. For example, tile bonding, tile mortar.
Hydroxypropyl Methyl Cellulose for Tile Adhesive Advantages
HPMC cellulose has many characteristics, such as thickening, water retention, dispersion, emulsification, film formation, adhesion, gelation and adsorption. The HPMC has good effect in tile adhesive, It can be improved the Anti-Slip, water retention, opening time, viscosity and strength of tile adhesion. Due to its high water performance, hydroxypropyl methyl cellulose does not need to be pre-soaked or wetted with tiles and substrates, which can significantly improve the bonding strength. The slurry can be constructed in a longer period, and the construction is convenient and uniform. It is delicate and has good anti-slip performance. HPMC with a thickening, binding, dispersing, emulsifying, PH value of stability, film, suspension, adsorption, gel, surface activity, maintain a features such as water and protective colloid.
1. Enhance water retention characteristics and extend working time.
2. Improve the bonding strength of tile adhesives.
3. Improves flexibility and deformability of the caulk.
4. It can enhance the sag resistance of tile adhesives.
5. Good bond strength, both thick and thin, with reduced shrinkage and tiles that do not crack or fall under stress.
6. Mortar has better malleability and flexibility, which makes construction easier and work more efficient.
What is the Difference Between EPDM and Nitrile Rubber?What are the benefits of carpet backing latex?
Additional resources:What is the best stabilizer for PVC?
Goto SLEO Chemical to know more.
HPMC for Tile Adhesive Specification
HPMC for Tile Adhesive Specification
HYDROXYPROPYL
7.0-12.0
METHOXY
28.0-32.0
WATER
5% MAX （≤5%)
THE ASH
5% MAX (≤5%)
VISCOSITY
5-200000 MPA.S or be customized according to your requirements.
GEL TEMPERATURE
56-64 ℃
CAS No.
9004-65-3
Grade Standard
In the Construction Industry Applications
In Coatings Industry Applications
In Daily Chemical Engineering Application
Purity
99%
PH Value
5-8
Appearance
White Powder or White-like Powder
Supply Ability
3000 Tons Each Month
Packaging
25KGS/BAG
OPP/PP/PE Bag Inside, Weaving Bag /Paper Bag/Carton Barrel Outside
Port
Tianjin Xingang and Qingdao
DELIVERY TIME
4-7 Days
As a functional decorative material widely used today, tiles come in different shapes and sizes, with different unit weights and densities. How to fix this durable material properly becomes the most important issue and we offer a variety of HPMC tile adhesives and MHEC to help you have a good bond with your tiles.
APPLICATION
HPMC Cellulose For Tile Adhesive; cement Mortar; Wall Putty; Laundry Detergent; Sandalwood/Mosquito-Repellent Incense etc. Tyoical application include High quality flexible ceramic brick gum, High quality flexible outdoor use of ceramic brick glue, Suitable for floor and wall tile pasting, Suitable for all sizes Glassy and non-glassy tiles, Suitable for mineral base and non-mineral base surface.
STORAGE METHOD
Construction grade HPMC products is powder. Store under dry and clean condition, ventilation required. Avoid the direct sunlight and damped area. Using the product as soon as possible after opening. If you can't use it up, keep it tightly closed. After being damp, the product will agglomerate.
1. 25KG/bag, OPP / PP / PE bag inside, weaving bag, paper bag or carton barrel outside.
2. Can be designed and customized by your requirements.
DELIVERY
We can deliver the goods within 4-7 days. Such a fast delivery time depends on our strong production capacity which is not affected by the environmental protection and the shutdown, so if you want to find a stable supplier of goods, choose us.
PAYMENT
We can accept TT, LC, PAYPAL, West Union, Money Gram etc.
Terms of delivery are EXW, FOB, C&F, CFR, CNF, CIF etc.
CERTIFICATION
The company is the world’s best Hydroxypropyl Methylcellulose For Tile Adhesive supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Comments
All Comments ( 0 )