Five Things You Need To Know Before Choosing A Baler

Balers might seem like simple machines performing a simple function, but the sheer amount of different designs and capabilities is a testament to the fact that they&#;re as varied as any kind of industrial equipment. As such, you&#;re going to need to know a little more about balers and their operation before you hit the market to buy your company&#;s trash and waste compactor. This article highlights five key fields of baler knowledge that&#;ll help you make a more informed decision about the baler you choose to onboard, helping you find the perfect match for your business.

The company is the world’s best Bailer Machines supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

They Operate Vertically or Horizontally

One of the primary differences in balers, when you see them in showrooms or online, is that they either crush in a downwards motion or a sideways one. Hence, you have vertical balers and horizontal balers on the market. Both are effective in their work, but they occupy a different shape and space in your warehouse and require a slightly different operation. It&#;s the first thing to bear in mind when shopping for balers.

Some Models Are Hard to Repair

As conventional wisdom goes, you should always buy American if you&#;re operating in America. That&#;s because if your machine breaks in the years to come, you have easier access to spares to repair it, meaning you can avoid a delay in your waste disposal system which can be costly and disruptive to your business as a whole. Find baler repair or baler monitor repair companies that you can trust &#; like Harris balers and their spares and repairs operators to ensure longevity in your purchase.

Scale is Important

What amount of waste is flowing through your business? Will you only be using your baler periodically, or is it going to be an important part of your business processes over time? The answers to these questions will determine which type of baler you should opt for &#; be that an auto-tie baler, two ram baler for ease and speed, or a manual baler that&#;s the best fit for smaller business producing less waste.

They&#;re Made Per Material

While some balers are made to crush all kinds of material, most are made to do a specific job, That&#;s because, as you can imagine, a cardboard baler requires a different crushing function to a baler that is enlisted to crush metals. Make sure that you&#;re cognizant of this fact from the get-go, purchasing only the type of baler you&#;ll need to process the waste materials that your company produces.

They Vary in Price

Of course, with any kind of product, you&#;ll find a large variation in the pricing. It&#;s no different for the baler industry, and this is an important point to consider when you&#;re shopping around for balers. In general, the more expensive models are more reliable, and can, therefore, be a better one-off investment for your business. That being said, used balers can be a good fit for businesses that are looking to cut investment costs, and you&#;ll be able to repair them cheaply if they&#;re a common make.

If you are looking for more details, kindly visit Baling Machines.

These tips should help you in your journey to purchasing the very best-suited baler for your business.

by John Rueckert

Like a used car, buyers need to be cautious when purchasing used balers and equipment. You could find the deal of a lifetime or a lifetime of complications. Here are five questions you should get answers to before buying a used baler.

1. When was the used baler last running?

One of the first questions to ask is, when was the baler last running in a MRF? If it has been recently moved, ask if it ever ran in that location. Even better, see the baler running for yourself. If you can&#;t confirm the most recent run date or see it operating, plan for there to be unknown electrical, hydraulic, and mechanical issues with your used baler.

2. Examine the baler&#;s paint job.

A Van Dyk factory-certified refurbished baler has had all existing components thoroughly inspected and any necessary structural, mechanical, electrical, and hydraulic components replaced as needed with OEM parts. Used Bollegraaf balers from other sources will not be restored to the same degree of quality and will claim to be rebuilt when all they had was a thorough paint job. If a &#;rebuilt&#; Bollegraaf baler has almost every component painted, be diligent and inspect the baler with more detail.

3. Measure the frame for structural integrity.

One of the biggest indicators of a used baler&#;s condition is in the frame. Check these thicknesses to know if your baler has significant wear:

4. Check for hydraulic leaks.

If the used baler hasn&#;t been running, seals may dry out and start leaking. Inspect the cylinders to see if there are any oil spots or dribbles on the floor or if oil is leaking down the piston. If there is no oil, the cylinders may have been recently cleaned. Ask to see the baler run to determine if the seals still have integrity. If they are busted, oil will start leaking from them while running and they will need to be rebuilt. All Van Dyk factory-certified refurbished balers have had their cylinders rebuilt, both flap and main ram ones. We take apart every single cylinder, replace all seals and rebuild the cylinder so it is like new.

5. Does the used baler have electrical damage?

If the baler has undergone a recent move, always check the electrical. Many times, inexperienced movers will damage electrical wiring when taking a baler out. Inspect the wiring and check to see if any cable sheathings are damaged. Also, older electrical components on used balers may no longer be serviced and would have to be upgraded if they are out of date. If you&#;re unsure whether we still carry the electrical components for the baler, call our service department to verify availability. Van Dyk factory-certified refurbished balers will have completely new wires and up to date electrical components so that unwanted electrical &#;gremlins&#; don&#;t pop up and cause unforeseen downtime.

FACTORY-CERTIFIED REFURBISHED BALERS

Only Van Dyk can guarantee that a refurbished baler is built to factory standards. At our Norwalk, CT facility, we have a dedicated baler rebuild shop to inspect, replace, and refurbish used balers that are salvageable. Our process is thorough and includes, but is not limited to:

• Completely taking apart the baler
• Replacing all wiring
• Rebuilding all cylinders
• Frame inspection
• Floor inspection
• Electrical inspection/upgrades
• Ram wheel replacements
• Pre-press flap inspection
• Manifold inspection

When you purchase a Van Dyk factory-certified refurbished baler, you can be sure the baler has been fully inspected and is as close to new as possible. Rebuilt or used Bollegraaf balers from other companies do not undergo the same rigorous inspection and reconstruction. If you do choose to purchase a used Bollegraaf baler elsewhere, educate yourself with these tips to prevent headaches and expensive upgrades down the road.

For more information, please visit automated waste sorting machine.