Fiberglass Lath Works Better than Metal (and Won't Rust)

A shorter version of this article appeared in Fine Homebuilding
.

You can find more information on our web, so please take a look.

In order to provide a positive mechanical bond for exterior stucco and manufactured-stone veneer, builders install lath over felt paper or housewrap. But if you have ever worked with conventional galvanized expanded-metal lath, you know that the chore is anything but a pleasure. Metal lath is sold in large sheets that are sharp, prone to rust, and must be fastened through housewrap or felt paper in such a way that there&#;s a chance of water penetration. To me, the future of lath lies in products like SpiderLath.

I was first drawn to SpiderLath because it comes in a 4 ft. x 75 ft. roll that weighs only 25 lbs., and because the material has no sharp edges. That means I can lath a 25-ft.- tall chimney by climbing to the top, unrolling a 4-ft. x 25-ft. piece &#; which weighs only 7 lbs. &#; fasten it at the top, and then work my way down, without cutting up my arms in the process.

Product Info:Manufactured by SpiderLath, Inc. www.spiderlath.comCost of a 300 sq. ft. roll: about $135

I was also pleased to learn some additional advantages of to this alternative material. SpiderLath has foam-rubber furring strips spaced 6 in. on-center; these strips not only hold the material off the wall &#; allowing mortar to squeeze through and get a good grip &#; but they seal every staple penetration through the felt paper or housewrap.

Made from alkaline-resistant fiberglass &#; coated to make it stiff and to protect the fibers from the abrasive elements in the stucco or stone adhesive &#; SpiderLath is actually stronger than expanded metal lath. It also can be cut with a utility knife or scissors, and though it is stiff enough to lie down smoothly it is still flexible enough to be easily folded around corners. Because it&#;s so easy to shape, we&#;ve recently used it for decorative stucco range hoods and interior fireplace surrounds. (Of course, there are a few tricks that you can do with galvanized lath &#; for example, crush it into a self-supporting three-dimensional shape &#; that you can&#;t do with fiberglass lath.)

I also like SpiderLath for its durability on the job site. Expanded-metal lath that sits around too long before being used always seems to get mangled into a crinkled mass of unusable rusty scrap metal. But other than the fact that the rubber furring strips get a little gummy when left in the sun, SpiderLath is pretty indestructible. I can keep a roll or two in the back of my trailer and cut off pieces as needed.

Fasten it with staples or roofing nails

Like galvanized lath, SpiderLath needs to be mechanically fastened 6 in. on center. We use galvanized roofing staples with a 1-in. crown and 1 ¼-in. leg or roofing nails. Since stucco expands and contracts at a different rate than the substrate, it&#;s a good idea to seal all penetrations. We use a Tyvek and a double layer of asphalt felt, and we install the SpiderLath with the rubber strips oriented vertically to allow moisture to drain to the weep screed at the bottom. On large projects, I use galvanized or PVC corner bead, drip screed, and expansion joints, but I omit these trim pieces on smaller jobs like chimneys and decorative interior stucco work.

On my jobs, the same carpenters who are responsible for the Tyvek, tape, flashings, and asphalt felt also install the lath, so the stucco crew just has to deal with the stucco. I think I get a better price when the stucco contractor&#;s scope of work is simplified, with no responsibility for the water-tightness of the system.

SpiderLath costs about the same as galvanized expanded-metal lath (about $0.50 per sq. ft.), but has to be ordered ahead of time from the manufacturer. (Some manufacturers also offer a more expensive type of non-metallic lath that isn&#;t mechanically fastened &#; it&#;s rolled into thinset over foam board. I priced this system for a recent job and, not counting the cost of the foam, it was 30% more expensive than the SpiderLath and two-coat type-S stucco system.)

&#;_Michael Chandler is a contributing editor and President of Chandler Design-Build, in Chapel Hill, NC_

Weekly Newsletter

Get building science and energy efficiency advice, plus special offers, in your inbox.

Signing you up...

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Expanded metal mesh is a versatile material that has a wide range of applications in construction and other industries. It is made by cutting and stretching a metal sheet to create a pattern of diamond-shaped openings. In this post, we'll explore the many benefits of using expanded metal mesh, including its ability to enhance safety, reduce maintenance costs, and improve the overall appearance of a building or structure.

If you want to learn more, please visit our website Wusheng Hardware.

Increased Durability and Strength.

One of the most significant benefits of using expanded metal mesh in construction is its increased durability and strength. The diamond-shaped openings in the mesh allow for better weight distribution and can withstand heavy loads without bending or breaking. This makes it an ideal material for use in flooring, walkways, and stair treads, where safety and durability are paramount. Additionally, the mesh is resistant to corrosion and rust, making it a long-lasting and cost-effective solution for construction projects.

Enhanced Safety and Security

One of the most surprising benefits of using expanded metal mesh in construction is its ability to enhance safety and security. The diamond-shaped openings in the mesh allow for better visibility, which can help prevent accidents and injuries. Additionally, the mesh can be used to create barriers and fencing, providing an extra layer of security for buildings and construction sites. The strength and durability of the mesh also make it resistant to vandalism and break-ins, further enhancing safety and security.

Improved Ventilation and Drainage

Another benefit of using expanded metal mesh in construction is improved ventilation and drainage. The mesh allows for air and water to flow freely, preventing moisture buildup and reducing the risk of mold and mildew growth. This is particularly important in areas like bathrooms and kitchens, where moisture can be a problem. Additionally, the mesh can be used as a drainage system for outdoor areas, preventing water from pooling and causing damage to the surrounding structures. Overall, the use of expanded metal mesh can lead to a healthier and safer environment for building occupants.

Reduced Maintenance Costs

One of the surprising benefits of using expanded metal mesh in construction is the reduced maintenance costs it can provide. The mesh is durable and resistant to wear and tear, meaning it can withstand heavy use and exposure to the elements without needing frequent repairs or replacements. This can save building owners and managers significant amounts of money in maintenance costs over time. Additionally, the mesh is easy to clean and maintain, further reducing the need for costly upkeep. Overall, the use of expanded metal mesh can provide long-term cost savings for construction projects.

Versatile Design Options

Another benefit of using expanded metal mesh in construction is the versatility it offers in design options. The mesh can be customized to fit a variety of shapes and sizes, making it ideal for unique and complex architectural designs. It can also be painted or coated in different colours to match the aesthetic of the building. This versatility allows for creative and innovative designs that can enhance the overall look and feel of a construction project.

About Us

Contact us to discuss your requirements of metal lath sheet. Our experienced sales team can help you identify the options that best suit your needs.